Flexim FLUXUS WD - Contrast Settings

18 Settings
FLUXUS WD 18.7 Contrast settings
147
UMFLUXUS_WDV1-3EN, 2018-07-16
• Enter the name the parameter record has to be stored with.
• Press ENTER.
18.6.2 Load of a parameter record
Stored parameter records can be loaded and used for measurement.
• Select the menu item Load param. record in the program branch Special functions\Param. record memo..
• Press ENTER.
• Select the parameter record to be loaded.
• Press ENTER.
18.6.3 Deletion of parameter records
• Select the menu item Delete param. record in the program branch Special functions\Param. record memo.
• Press ENTER.
• Select the parameter record to be deleted.
• Press ENTER.
18.7 Contrast settings
• Select the menu item System settings in the program branch Special functions.
• Press ENTER.
• Select the menu item Display contrast.
• Press ENTER.
The display contrast is adjusted with the following keys:
increases the contrast
reduces the contrast
• Press ENTER.
Special functions\Param. record name
Special functions\Param. record memo.\Load param. record
Special functions\Param. record memo.\Delete param. record
Special functions\System settings\Display contrast
Notice!
After an initialization of the transmitter, the display is reset to medium contrast.