Flexim FLUXUS WD - Material Scroll List; Working with Parameter Records

18 Settings
18.5 Material scroll list FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
146
18.5 Material scroll list
At delivery, all stored materials are displayed in a scroll list in Parameters\Pipe material.
For the sake of clarity, materials can be removed from the scroll list. Removed materials can be added at any time.
Addition or removal of a material
• Select the menu item Use material list in the program branch Special functions\Libraries.
• Press ENTER.
•Select Yes if a material is to be added or removed from the material scroll list.
• Press ENTER.
• Press key or to scroll through the scroll list.
• Press key or to add (+) or remove (-) a material.
• Press ENTER.
Similarly, the fluid scroll list can be adapted (Special functions\Libraries\Use fluid list).
Addition of all materials
• Select the menu item Use material list in the program branch Special functions\Libraries.
• Press ENTER.
•Select No if all materials are to be displayed in the material scroll list.
• Press ENTER.
Similarly, the fluid scroll list can be adapted (Special functions\Libraries\Use fluid list).
18.6 Working with parameter records
18.6.1 Introduction
Parameter records are data sets that contain all information necessary to perform a certain measurement task:
• pipe parameters
• transducer parameters
• fluid parameter
• output options
Working with parameter records will make repeated measurement tasks easier and faster. The transmitter can store max.
20 parameter records.
The parameters have first to be entered in the program branches Parameters, Options and Special functions.
Afterwards, they can be stored as parameter record.
•Select Special functions\Param. record memo.
• Press ENTER.
•Select Save current record.
• Press ENTER.
Special functions\Libraries\Use material list
Special functions\Libraries\Use material list
Notice!
No parameter records are stored in the delivery state. Parameter records are entered manually.
Special functions\Param. record memo.