Flexim FLUXUS WD - Transport and Storage; Transport; Storage

5 Transport and storage
FLUXUS WD 5.1 Transport
23
UMFLUXUS_WDV1-3EN, 2018-07-16
5 Transport and storage
5.1 Transport
The measuring equipment must be packaged properly for transport, see section 2.7. For weight indications of the transmitter
and the transducers, see Technical specification.
5.2 Storage
The transmitter and the transducers have to be stored in a dry place.
Caution!
When packaging, the transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
 Secure the transmitter against falling during packaging. Wear the required personal protective equip-
ment. Observe the applicable rules.
Caution!
When lifting, the center of gravity of the transmitter can be displaced within the cardboard box. The
transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
 Secure the transmitter against falling during transport. Wear the required personal protective equip-
ment. Observe the applicable rules.