Flexim FLUXUS WD - Remote Functions

17 Advanced functions
FLUXUS WD 17.6 Remote functions
135
UMFLUXUS_WDV1-3EN, 2018-07-16
17.6 Remote functions
Remote functions can be released via event triggers,
triggerable analog or binary inputs.
In order to define a remote function for an event trigger it
has to be activated in the program branch Options\
Channel x\Event trigger.
It is possible to trigger one or more remote functions for dif-
ferent channels.
The following remote functions are available:
• reset of measured values
• reset totalizers
• stop totalizers
• activation of the FastFood mode
• Not for calculation
Event trigger
The remote function is triggered if the trigger function is fulfilled. The remote function is reset as soon as the trigger func-
tion is not longer met.
17.6.1 Configuration of the remote function
The remote function can be configured for each individual channel.
• Select the measuring channel in the program branch Options for which an remote function is to be activated.
• Press ENTER.
• Select the menu item Remote functions.
• Press ENTER.
In the scroll list of the functions displays whether the function is and with which input assigned.
• Select a list item:
– Reset meas. val. (-)
– Reset totalizers (-)
– Stop totalizers (-)
– Activate FastF (-)
– Not for calc. (-)
If this function has already been assigned to an input or event trigger, it is displayed as follows: Reset meas. val.
(R1).
• Press key to return to the previous menu.
Options
Channel x
Remote functions
 Reset meas. val.
 Reset totalizers
 Stop totalizers
 Activate FastF
 Not for calc.
With input
see annex A, p. 161
Options\Channel ...\Remote functions
Notice!
The settings made are stored at the beginning of a measurement.