8 Start-up
8.7 Time and date FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
72
If Yes is selected, the following setting dialogs will be displayed.
•Language
•Time/date
•Units of measurement
•Delete meas. values
•Delete snaps
• Delete user subst. (all user-defined materials and fluids which were stored after delivery will be deleted)
•Reset totalizers
The initialization can also be started with the HotCode 909000.
8.7 Time and date
The transmitter has a battery-powered clock. Measured values are automatically stored with time and date.
•Select Time/date.
The adjusted time is displayed.
• Enter the current time via the numeric field.
• Press ENTER.
The adjusted date is displayed.
• Enter the current date via the numeric field.
• Press ENTER.
8.8 Information regarding the transmitter
•Select Transmitter info.
• Press ENTER.
• Press key or to scroll through the list.
• Press key to return to the menu item System settings.
The following information regarding the transmitter is displayed:
Initial settings
Special functions\System settings\Time/date
Special functions\System settings\Transmitter info
display description
Serial number type and serial number of the transmitter
Firmware version version number of the installed firmware
Firmware date creation date of the installed firmware
Production date manufacturing date of the transmitter
MAC address MAC address of the transmitter
Service TCP Port TCP port of the transmitter
To Next Page
Loading...
