Flexim FLUXUS WD - Service Interfaces

7 Connection
FLUXUS WD 7.4 Service interfaces
65
UMFLUXUS_WDV1-3EN, 2018-07-16
7 Connection
7.4 Service interfaces
7.4.1 USB interface
The transmitter can be connected directly to the PC via USB interface.
• Connect the USB cable to the USB interface of the transmitter and the PC, see Fig. 7.13.
7.4.2 Ethernet interface
The transmitter can be connected to the PC or LAN network via an Ethernet cable.
Transmitter with stainless steel housing
• Remove the blind plug on the transmitter to connect the cable, see Fig. 7.14 .
• Open the cable gland of the Ethernet cable. The compression part remains in the cap nut, see Fig. 7.15.
Fig. 7.13: Connection of the USB cable
1 – USB interface
Fig. 7.14: Connection of the Ethernet cable (transmitter with stainless steel housing)
1 – Ethernet interface
2 – ferrite nut
3 – Ethernet connector
1
2
1
3