Flexim FLUXUS WD - Repeated Display of Measured Values; Execution of Special Functions

9 Measurement
9.6 Repeated display of measured values FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
92
9.6 Repeated display of measured values
• Select the program branch Measurement to return to the measured value display.
• Press ENTER.
The following display appears:
•Select Show measurement in the scroll list.
• Press ENTER.
The measured values are displayed.
9.7 Execution of special functions
Some key have multiple functions. They can be used to enter data, to navigate through scroll lists and to execute special
functions.
Fig. 9.7: Scroll list in the program branch Measurement
Measurement\Show measurement
Tab. 9.7: Key functions
key function
toggling between the AutoMux and HumanMux mode
totalizer display
triggering snaps
toggling between the displays of the activated channels
toggling between the TransitTime and the FastFood mode
toggling between the TransitTime and the NoiseTrek mode
display of scroll list in the program branch Measurement, see Fig. 9.6.
ENTER display of diagnostic window