Flexim FLUXUS WD - Page 49

6 Installation
FLUXUS WD 6.2 Transducers
49
UMFLUXUS_WDV1-3EN, 2018-07-16
• Put the rail on the tension strap clamps, see Fig. 6.46.
• Fix the rail to the tension strap clamps with the screws.
• Tighten the screws.
Notice!
In order to release the screw and the tension strap, press the lever down, see Fig. 6.45.
Fig. 6.44: Ratchet clasp with tension strap, tension strap clamp and metal spring
1–metal spring
2 – ratchet clasp
3 – tension strap clamp
Fig. 6.45: Ratchet clasp with tension strap
1 – sense of rotation
2 – edge
3–lever
4 – clasp screw with slot
Fig. 6.46: Rail on the pipe
1–screws
2
1
3
1
2
4
3
4
1