6 Installation
FLUXUS WD 6.2 Transducers
51
UMFLUXUS_WDV1-3EN, 2018-07-16
Remove the cover from the mounted transducer mounting fixture Variofix C as follows:
• Use a lever tool to remove the cover.
• Insert the lever tool in one of the 4 openings of the cover, see Fig. 6.50.
• Press the lever tool against the fixture.
• Bend the cover outwards and release it from the anchoring.
• Repeat the steps for the other 3 openings.
• Remove the cover from the rail.
Fig. 6.49: Variofix C with transducers on the pipe
1–screw
2–cover
Fig. 6.50: Removal of the cover
1 – lever tool
2–fixture
To Next Page
Loading...
