Flight Data Systems HHMPI - Network Settings; Security Settings; Live Data Settings; Settings Profile

Getting started
18 Operators manual
Handheld Multi-Purpose Interface (HHMPI)
 Ask for device - Prompts the user to specify a device for download or file transfer.
 Priority list - Prioritize memory devices based on customised preference.
 User Specified Device - Set default memory device for storage and file transfer.
3.5.4 Network Settings
When connecting the HHMPI to a network connection via an Ethernet cable, setup IP,
DHCP and FTP settings necessary for network operation. See Section 4.7, ”Network oper-
ations” on page 33.
3.5.5 Aircraft Settings
Set or edit aircraft tail numbers. See Section 4.2, ”Aircraft lists” on page 19.
3.5.6 Security Settings
Set access to the menus and settings of the HHMPI by using password access by select-
ing the following:
 Restrict Configuration - Restrict modification of any HHMPI settings.
 Restrict Menus - Only allow access to previously configured shortcut keys.
3.5.7 Live Data Settings
Set the global live data settings to be used in the live data view from, some of these
options may only be available for the L-3 Communications SRVIVR™™ interface:
 ARINC 717
 ARINC 429. Standard or periodic.
 DLR Settings. Select the data display format and data word description.
3.5.8 Shortcut Keys
Set shortcut keys to change by selecting one of the options from the menu.
3.5.9 Settings Profile
Save or load the device configuration to a file, or reset the configuration to the factory
default settings:
▼▲
Main Menu > Device Configuration > Network Settings
▼▲
Main Menu > Device Configuration > Aircraft Settings
▼▲
Main Menu > Device Configuration > Security Settings
▼▲
Main Menu > Device Configuration > Live Data Settings
▼▲
Main Menu > Device Configuration > Shortcut Keys
▼▲
Main Menu > Device Configuration > Settings Profile