FT-111(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 7 of 146
3 INTRODUCTION
3.1 Overview
FT-111 Weighing indicator is economic and powerful state-of-the-art indicator for industrial weighing applications like basic
weighing, labelling system control with digital outputs, fieldbus interfacing etc. It’s set memory 500 item record size which
each item has 5 pieces limit values gives big advantage in operation.
Digital inputs and outputs of the instrument can be programmed as a Remote IO on the fieldbus. This feature gives
advantage to eliminate additional PLC in the cabinet for only having remote IO’s.
The scales equipped with FT-111 weighing indicator can be used in all kind of industrial areas up harsh, to wet and hygienic
environments with its fast and efficient cleaning that was designed and built according to the international guidelines.
3.2 Variants
These panel type indicators may have various industrial interfacings and digital Inputs/Outputs. A variant of FT-
111 (D) indicators specifies the peripheral interfacings of the instrument as shown below. All variants can
connect to Modbus RTU and Modbus TCP instruments which requirements Modbus SD card.
Other features and specifications of all variants are the same. FT-111 (D) names are used as family names in
this manual. Variant names are written only to describe interfacing the instrument have.