Fluke 5520A - Page 415

1
Index
*CLS remote command, 6-11
*ESE remote command, 6-17
*ESE? remote command, 6-17
*ESR? remote command, 6-17
*IDN? remote command, 6-21
*OPC command, using, 5-47
*OPC remote command, 6-27
*OPC? command, using, 5-47
*OPC? remote command, 6-28
*OPT? remote command, 6-28
*PUD remote command, 6-35
*PUD? remote command, 6-35
*RST remote command, 6-40
*SRE remote command, 6-44
*SRE? remote command, 6-45
*STB? remote command, 6-45
*TEMP_STD? remote command, 6-50
*TRG remote command, 6-50
*TRG remote command, SC600 option, 8-40
*TST? remote command, 6-52
*WAI command, using, 5-47
*WAI remote command, 6-55
+/- key, 3-8
10 MHz IN BNC connector, 3-10
10 MHz IN BNC connector, using, 4-58
10 MHz OUT BNC connector, 3-10
10 MHz OUT BNC connector, using, 4-58
20A terminal, 3-9
3-phase power calibration, 4-60
80 Series DMM, calibrating, 4-61
ac current
(non-sine wave) specifications, 1-32
(sine wave) extended bandwidth
specifications, 1-31
connections, 4-16
setting the output, 4-24
square wave characteristics (typical), 1-34
triangle wave characteristics (typical), 1-34
ac power
(45 Hz to 65 Hz) specification summary, 1-22
setting the output, 4-28
AC POWER INPUT module, 3-11
ac voltage
(non-sine wave) specifications, 1-29
(sine wave) extended bandwidth
specifications, 1-28
connections, 4-16
dc offset specifications, 1-30
square wave characteristics, 1-31
triangle wave characteristics (typical), 1-31
accessing the fuse and selecting line voltage, 2-6
accessories and options (Chapter 8), 9-3
air filter, cleaning, 7-5
arrow keys, 3-6
AUX terminals, 3-9
cable connection instructions, 4-12
CALIBRATION switch, 3-10, 5-31
capacitance
(compensation off) connections, 4-15
(two-wire compensation) connections, 4-15
setting the output, 4-38
specifications, 1-19
Caution, 4-73, 7-6
CAUTION, 2-4, 2-8, 4-3, 4-6, 4-19, 4-20, 4-26,
4-29, 4-32, 4-34, 7-5
CE key, 3-6
CFREQ? remote command, 6-10
character processing, incoming, 5-35
CHASSIS GROUND terminal, 3-11
cleaning, general, 7-6, 7-7
CLOCK remote command, 6-10
clock, external 10 MHz, 4-58
CLOCK? remote command, 6-11
commands, remote