Fluke 5520A - Page 416

5520A
Operators Manual
2
setup and utility, 6-8
status, 6-9
thermocouple (TC), 6-9
commands, remote
pressure measurement, 6-7
common, 6-3
common, 5-27
compound, 5-29
coupled, 5-29
error mode, 6-4
external connection, 6-4
for IEEE-488 only, 5-32
for RS-232 only, 5-31
grouped by function, 6-3
listed alphabetically, 6-10
oscilloscope, 6-5
output commands, 6-5
overlapped, 5-30
query, 5-27
RS-232 Host port, 6-7
sequential, 5-30
syntax information, 5-33
types of, 5-26
using, 5-26
commands,remote
RS-232 UUT Port, 6-7
common commands, 5-27, 6-3
compound commands, 5-29
controlling an instrument using RS-232, 5-49
coupled commands, 5-29
CUR_POST remote command, 6-11
CUR_POST? remote command, 6-11
DAMPEN remote command, 6-11
DAMPEN? remote command, 6-12
DBMZ remote command, 6-12
DBMZ? remote command, 6-12
DBMZ_D remote command, 6-13
DBMZ_D? remote command, 6-13
dc current
connections, 4-16
setting the output, 4-23
specifications, 1-13
dc power
setting the output, 4-26
specification summary, 1-22
dc voltage
connections, 4-16
DC_OFFSET remote command, 6-13
DC_OFFSET? remote command, 6-13
defaults for setup menus, 3-22
device-dependent commands, 5-26
display
control, 3-4
output, 3-4
DIV (divide) key, using, 4-54
DIVIDE key, 3-7
DPF remote command, 6-14
DPF? remote command, 6-14
dual ac voltage, setting the output, 4-34
dual dc voltage, setting the output, 4-32
DUTY remote command, 6-14
DUTY? remote command, 6-14
EARTH key, 3-5
EARTH remote command, 6-15
EARTH? remote command, 6-15
EDIT FIELD key, 3-6
EDIT FIELD keys and knob, using, 4-53
EDIT remote command, 6-15
EDIT? remote command, 6-15
ENTER key, 3-8
ERR? remote command, 6-16
ERR_UNIT remote command, 6-16
ERR_UNIT? remote command, 6-17
error
handler, 5-3
handler, writing, 5-46
mode operation, 4-18
mode remote commands, 6-4
queue, 5-45
ESE (event status enable register), 5-40
ESR (event status register), 5-40
event status enable register (ESE), 5-40
event status register (ESR), 5-40
EXGRD key, 3-5
EXPLAIN? remote command, 6-17
external connection commands, 6-4
external guard, using, 4-10
EXTGUARD remote command, 6-18
EXTGUARD? remote command, 6-18
fan filter, 3-10
FAULT? remote command, 6-18
filter, fan, 3-10
FORMAT remote command, 6-19
frequency
response calibration, SC300 option, 8-74
response calibration, SC600 option, 8-24
specifications, 1-26
sweep for oscilloscope calibration, SC600
option, 8-24
sweep for SC300 option, 8-77
frequency response calibration, SC300
option, 8-78
front panel features, 3-3
front panel operation (Chapter 4), 4-3
FUNC? remote command, 6-20
fuse
ratings, 2-4
replacement, 7-3
fuse, accessing the, 2-6
GUARD terminal, 3-9
HARMONIC remote command, 6-20
HARMONIC? remote command, 6-21