Fluke 5520A - Page 417

Index (continued)
3
harmonics (2nd - 50th) specifications, 1-27
IEEE-488
connector, 3-10
interface cable, 9-4
interface messages, 5-27
interface overview, 5-24
interface, description, 5-6
interface, setting up, 5-8
interface, testing the, 5-9
remote control connections, 5-5
INCR remote command, 6-21
input buffer operation, 5-49
input capacitance measurement, SC600
option, 8-33
input impedance measurement, SC600
option, 8-32
instrument status change enable registers (ISCRE
and 1), 5-42
instrument status change registers (ISCR0
and 1), 5-42
instrument status register (ISR), 5-42
interface messages (IEEE-488), 5-27
ISCE remote command, 6-22
ISCE? remote command, 6-22
ISCE0 remote command, 6-22
ISCE0, ISCE1 (instrument status change enable
registers), 5-42
ISCE0? remote command, 6-22
ISCE1 remote command, 6-22
ISCE1? remote command, 6-23
ISCR? remote command, 6-23
ISCR0, ISCR1 (instrument status change
registers), 5-42
ISCR0? remote command, 6-23
ISCR1? remote command, 6-23
ISR (instrument status register), 5-42
ISR? remote command, 6-24
LCOMP remote command, 6-24
LCOMP? remote command, 6-24
LIMIT remote command, 6-25
LIMIT? remote command, 6-25
line
power cord types - table of, 2-7
voltage, selecting, 2-6
LOCAL remote command, 6-25
local state, 5-22
local with lockout state, 5-22
LOCKOUT remote command, 6-25
Lockout State
Local with, 5-22
LOWS remote command, 6-26
LOWS? remote command, 6-26
maintenance (Chapter 7), 7-3
MEAS TC key, 3-7
modem cables, 9-4
module, pressure, 4-56
MORE MODES key, 3-7
MULT remote command, 6-26
multiplier keys, 3-7
MULTIPLY key, 3-7
NEW REF key, 3-6
NEWREF remote command, 6-27
NORMAL terminals, 3-9
null-modem cables, 9-4
numeric keys, 3-8
OL_TRIP remote command, SC600 option, 8-39
OLDREF remote command, 6-27
ONTIME? remote command, 6-27
OPER remote command, 6-28
OPER? remote command, 6-28
OPR key, 3-5
options and accessories (Chapter 8), 9-3
oscilloscope calibration
SC300 connections, 8-65
SC300 specifications, 8-60
SC600 connections, 8-13
oscilloscope calibration with the SC300, 8-59
oscilloscope calibration with the SC600, 8-5
oscilloscope commands, 6-5
OUT remote command, 6-29
OUT? remote command, 6-30
OUT_ERR? remote command, 6-31
OUT_IMP remote command, for SC300, 8-85
OUT_IMP remote command, SC600
option, 8-37
OUT_IMP? remote command, for SC300, 8-85
OUT_IMP? remote command, SC600
option, 8-37
output queue, 5-44
overlapped commands, 5-30
overload protection, testing (SC600), 8-33
parallel-connected 5520As, current output, 4-58
parameter syntax rules, 5-33
phase
specifications, 1-24
PHASE remote command, 6-31
PHASE? remote command, 6-31
plus/minus key, 3-8
power and dual output limit specifications, 1-23
power cords, 2-7
power uncertainty, calculating, 1-25
POWER? remote command, 6-32
PR_PRT X IEEE X RS=232 remote
command, 6-32
PRES? remote command, 6-32
PRES_MEAS remote command, 6-33
PRES_UNIT remote command, 6-33
PRES_UNIT? remote command, 6-33
PRES_UNIT_D remote command, 6-34
PRES_UNIT_D? remote command, 6-34
pressure measurement, remote example, 5-48
pressure, measuring, 4-56