Fluke 5730A User Manual

5730A
Operators Manual
4-56
Instrument Settings
Set the Internal Clock/Calendar
An internal clock/calendar provides the date (corrected for leap years) and time to the
Calibrator CPU (Central Processing Unit). The clock setting should be checked and set if
necessary.
Note
A long-life lithium battery keeps the clock/calendar running during power-
off periods. If the battery in the Calibrator should ever need replacement,
contact a Fluke Calibration Service Center.
To set the date or time, enter a security passcode. Touch Setup Menu>Instrument
Settings>Date/Time. The display is shown below.
The time can be set without the security passcode. The security passcode is explained in
“Calibration Security Passcode”.
Exit
Instrument
Settings
Date/Time
Month 03
Day 14
14
Date Time
Year 2013
54:
Format M/D/Y
Setup Menu
hhp108.eps

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)