Fluke 5730A User Manual

5730A
Operators Manual
7-4
Clean the Exterior
To keep the 5730A Calibrator looking new, clean the case, front panel keys, and display
with a soft cloth slightly dampened with either water or a non-abrasive mild cleaning
solution that is not harmful to plastics.
Caution
Do not use aromatic hydrocarbons or chlorinated solvents for
cleaning. They can damage the plastic materials used in the
Product.
User-Replaceable Parts
User-replaceable parts are listed in Table 7-2 and shown in Figure 7-3. For more
information about these items contact a Fluke Calibration representative. See the
“Contact Fluke Calibration” section of this manual.
Table 7-2. User-Replaceable Parts
Item
Number
Description
Part
Number
 Top Cover 4104376
 Handle 4104383
 Side Extrusion 3468705
 Insert Extrusion 4104451
 Bottom Cover 4219600
 USB Decal 4219557
 Input Decal 4219569
 Encoder Knob 4222803
 5730A Decal 4233853
 Air Filter 813493
  Fuse (100 V – 120 V, T 3 A 250 V) 109280
  Fuse (220 V – 240 V, T 3 A 250 V) 109231
Not Shown 5730A Manuals CD 4290581
Not Shown 5730A Getting Started Manual 4290571

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)