5730A
Operators Manual
8-2
Table 8-1 summarizes the accessories available for the Calibrator. After the table is a
brief description of each accessory.
Table 8-1. Accessories
Model Description
732B DC Voltage Reference Standard
742A-1 1 Ω Resistance Transfer Standard
742A-10k 10 kΩ Resistance Transfer Standard
5440A-7003
Low Thermal EMF Test Lead Set with Spade Lugs.
Two 4 ft. (122 cm) cables and One 2 ft. (61 cm) cable.
5440A-7002 Low Thermal Test Lead cables with banana plugs.
5730A-7002 Low Thermal Test Lead cables with banana plugs.
5730A-7003 Low Thermal Test Lead cables with spade lugs.
Y8021 IEEE-488 Shielded Interface Cable, 1 Meter
Y8022 IEEE-488 Shielded Interface Cable, 2 Meters
Y5737 24 in (61 cm) Rack Mount Kit
Y5735 24 in (61 cm) Rack Mount Kit for 5725A
Y5738 Rack Ear Kit
5730A/03 30 MHz Wideband AC Voltage option
5730A/05 50 MHz Wideband AC Voltage option
Low Thermal EMF Test Leads
Four types of low thermal test leads are available. These cables are designed to exhibit
low thermal emfs. The available types are:
• Model 5440A-7002. Low Thermal Test Lead cables with banana plugs.
Set includes one 4 ft. (122 cm) cable and two 2 ft. (61 cm) cables. Each cable
includes two conductors and a shield lead.
• Model 5440A-7003. Low Thermal Test Lead cables with spade lugs.
Set includes one 4 ft. (122 cm) cables and two 2 ft. (61 cm) cable. Each cable
includes two conductors and a shield lead. Shield lead has a banana plug connector.
• Model 5730A-7002. Low Thermal Test Lead cables with banana plugs. Set includes
two 4 ft. (122 cm) cables. Each cable includes two conductors and a shield lead.
• Model 5730A-7003. Low Thermal Test Lead cables with spade lugs. Set includes
two 4 ft. (122 cm) cables. Each cable includes two conductors and a shield lead.
Shield lead has a banana connector.
To Next Page
Loading...
Need help?
General
