Fluke 5730A - Page 173

Remote Commands and Syntax
Commands 6
6-47
Table 6-6. Serial Remote Control Commands
LOCAL
Description
Sequential command.
Enables the local state. This command duplicates the IEEE-488-GTL (Go to Local)
message.
Parameter None
LOCKOUT
Description
Sequential command.
Enables the local lockout state. This command duplicates the IEEE-488 LLO (Local
Lookout) message.
Parameter None
REMOTE
Description
Sequential command.
Enables the remote state. This command duplicates the IEEE-488 REN (Remote
Enable) message.
Parameter None
Table 6-7. Range Identifiers for Remote Commands
Function Ranges
DC Voltage
DC220MV
DC1100V
DC2_2V DC11V DC22V DC220V
DC Current
DC220UA
DC5725A
DC2_2MA
DC52120A_2A
DC22MA
DC52120A_20A
DC220MA
DC52120A_100A
DC2_2A
AC Voltage
AC2_2MV
AC220V
AC22MV
AC1100V
AC220MV
AC5725A
AC2_2V AC22V
AC Current
AC220UA
AC5725A
AC2_2MA
AC52120A_2A
AC22MA
AC52120A_20A
AC220MA
AC52120A_120A
AC2_2A
Resistance
OHM0
OHM100
OHM19K
OHM10M
OHM1
OHM190
OHM100K
OHM19M
OHM1_9
OHM1K
OHM190K
OHM100M
OHM10
OHM1_9K
OHM1M
OHM19
OHM10K
OHM1_9M
Wideband
WB1_1MV
WB330MV
WB3_3MV
WB1_1V
WB11MV
WB3_5V
WB33MV WB110MV