Fluke 5730A User Manual

5730A
Operators Manual
6-56
Note
The Calibrator Main CPU software revision levels can be checked with the
Instmt Config Menu, or *IDN? remote command.
After the Calibrator has encountered a fault, do one of the subsequent actions to reenable
the OPER command:
1. Send *CLS (to clear the ESR and fault queue)
2. Send *ESR? (to read and clear the ESR)
3. Repeatedly send the FAULT? query until 0 is returned, indicating that all faults from
the queue have been read and cleared.

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)