Fluke 5730A - Page 226

5730A
Operators Manual
A-16
2810 A11: +11 V DC Range Fault
2811 A11: -11 V DC Range Fault
2812 A11: +22 V DC Range Fault
2813 A11: -22 V DC Range Fault
2814 A11: 6.5 V Buffered Reference Fault
2815 A11: 6.5 V Reference Fault
2816 A11: 13 V Buffered Reference Fault
2817 A11: 13 V Reference Fault
2818 Assembly A11 Missing
2819 A11: 8255 Was Reset
2820 A11: Fine Adjust Channel Fault
2821 A8/A11: +11/22 V DC Zero Estimate Fault
2822 A8/A11: -11/22 V DC Zero Estimate Fault
2823 A11: Could not Estimate +11 V Or 22 V Gain
2824 A11: Could not Estimate 6.5 V Or 13 V Ref
2825 A11: Could not Est 6.5 V Or 13 V Buf Ref
2826 A11: A/D Overload Fault
3100-Level Faults: Self Diagnostics (High Voltage)
3100 A14: 8255 Control Word
3101 A14: 8255 Port A Fault
3102 A14: 8255 Port B Fault
3103 A14: 8255 Port C Fault
3104 A15: HV Oven Regulation Fault
3105 A15: HV I Oven Regulation Fault
3106 A15: DC HV Amp Noise Fault
3107 A15: DC HV Amp Offset Fault
3108 A15: DC HV Amp Gain Fault
3109 A15: HV +DC Preamplifier Fault
3110 A15: HV +DC Series Pass & Current Fault
3111 A15: HV +DC High Voltage Output Fault
3112 A15: HV +DC Ref/Error Amplitude Fault
3113 A15: HV -DC Preamplifier Fault
3114 A15: HV -DC Series Pass & Current Fault
3115 A15: HV -DC High Voltage output Fault