Fluke 5730A User Manual

5730A
Operators Manual
4-20
In dc current output, the selections available at the bottom are:
• Current Output
• External Guard
• Boost
• Wideband
• Setup Menu
In addition, the Offset and Scale functions are available. The output range can be locked
in dc current.
Current Output selects one of three locations for non-boosted (current sourced by the
Calibrator, for example) current output:
• OUTPUT binding post (NORMAL, which is the OUTPUT HI binding post, also the
default setting)
• AUX, which is the AUX CURRENT OUTPUT binding post
• 5725A which is the 5725A Amplifier binding posts. (The 5725A must be turned on,
but not necessarily activated.)
Non-boosted current from the Calibrator is not available at the 52120A amplifier binding
posts.

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)