830
Users Manual
78
Saving data and printing
(Refer to page 81.)
Finally
Switch the Product off, and then remove the components from the shafts, and
store them in the case.
Warning
Replace guards before you switch the machine back on.
Vertical live Move
Note
As it is recommended to rst shim, and then move the machine laterally, the
vertical live Move function may be used to carry out the shimming.
For vertical live Move repeat all steps starting from ‘Start live horizontal Move’ (on
page 75) through to ‘Loosen bolts and move machine as required’ (on page
76) but with reference to the vertical foot corrections. In this case, shimming as
required.
To Next Page
Loading...
