Fluke Endurance E3ML - Optical Specifications

Endurance® Series
Users Manual
12
Response Time at 95% Reading
E1ML
E1MH
E2ML
E2MM
E2MH
E3ML
E3MH
E1RL
E1RH
E2RL
2 ms
2 ms
2 ms
2 ms
2 ms
20 ms
20 ms
10 ms
10 ms
20 ms
Selectable Analog Current output
0-20mA or 4-20mA (galvanic isolated)
16bit resolution, max. impedance: 500Ω
Emissivity Coefficient (1-Color mode)
E1ML, E1MH, E2ML, E2MM, E2MH,
E3ML, E3MH, E1RL, E1RH,
E2RL
Slope Coefficient (2-Color mode)
E1ML, E1MH, E2ML, E2MM, E2MH,
E3ML, E3MH
E1RL, E1RH, E2RL
Digitally adjustable in increments of 0.001
0.100 to 1.100
0.100 to 1.100
0.100 to 1.100
Digitally adjustable in increments of 0.001
N/A
N/A
0.850 to 1.150
Signal Processing
Averaging, Peak hold or Valley hold
Averaging Range
0.1 to 299.9 s (300 s = )
Peak Hold Range
0.1 to 299.9 s (300 s = )
Valley Hold Range
0.1 to 299.9 s (300 s = )
Noise Equivalent Temperature (NET)
1°C peak to peak, target emissivity of 1.00,
unobscured target, 3°C peak to peak for all
specified attenuation conditions
3.4. Optical Specifications
Optical Specifications
Optical Resolution D:S
E1ML:
E1MH:
E2ML:
E2MM:
E2MH:
E3ML:
E3MH:
E1RL (1C / 2C-mode):
E1RH (1C / 2C-mode):
E2RL (1C / 2C-mode):
(assumes 95% energy at the focus point)
D:S = 160:1
D:S = 300:1
D:S = 160:1
D:S = 160:1
D:S = 300:1
D:S = 100:1
D:S = 300:1
D:S = 100:1
D:S = 150:1
D:S = 75:1
Lens Options
F0: 190 - 300mm (7.5 - 12")
F1: 300 - 600mm (12 - 24")
F2: 600mm - infinity (24" - ∞)
Sighting Options
Visual/Laser
Visual/Camera
Visual/LED
w ww. . com
information@itm.com1.800.561.8187