Fluke Endurance E3ML - Adapter Kit to Use Endurance Sensors in Modline5 WJA (E-M5 WJAK); Figure 67: Right Angle Mirror for Targets at Right Angles to Sensor Axis (E-RA); Figure 68: Adapter Kit to Use Endurance Sensors in Modline5 WJA (E-M5 WJAK); Right Angle Mirror for Targets at Right Angles to Sensor Axis (E-RA)

Endurance® Series
Users Manual
78
9.2.7. Right angle mirror for targets at right angles to sensor axis (E-RA)
The Right angle mirror is to redirect the measured object temperature spot at an angle of 90°.
This allows placing the Endurance sensor closer to the object to measure or in a more protected
domain. To keep the inserted mirror dust and dirt clean, the right angle mirror has an air-purge
adapter and needs to be supplied by air.
Figure 67: Right angle mirror for targets at right angles to sensor axis (E-RA)
9.2.8. Adapter kit to use Endurance sensors in Modline5 WJA (E-M5WJAK)
This adapter kit is required to modify the Modline5 WJA and allow the secured installation of an
Endurance sensor in the Modline5 WJA.
Figure 68: Adapter kit to use Endurance sensors in Modline5 WJA (E-M5WJAK)
w ww. . com
information@itm.com1.800.561.8187