Fluke Endurance E3ML - Figure 71: Mounting Flange (E-MF-7); Figure 72: Flange Adapter to Allow Endurance to Mount to MF-7 (E-MFA-7); Flange Adapter (E-MFA-7) to Allow Endurance to Mount to E-MF-7; Mounting Flange (E-MF-7)

Endurance® Series
Users Manual
80
9.2.11. Mounting flange (E-MF-7)
The E-MF-7 allows an Endurance sensor to be mounted into an existing Ircon flange mount
installation. Please note that this accessory needs to be used in conjuction with the E-MFA-7
to adapt the outer Endurance sensor thread to the outer Modline thread. E-MF-7 together with
E-MFA-7 are needed to mount en Endurance sensor into an existing Ircon flange mount
installation.
Figure 71: Mounting flange (E-MF-7)
9.2.12. Flange adapter (E-MFA-7) to allow Endurance to mount to E-MF-7
The accessory (E-MFA-7) is secured to the front of the Endurance sensor and then threads into
the E-MF-7 for use in existing Ircon flange mount installations.
Figure 72: Flange adapter to allow Endurance to mount to MF-7 (E-MFA-7)
w ww. . com
information@itm.com1.800.561.8187