Endurance® Series
Users Manual
46
8. Options
Options are items, which are factory installed and must be specified at time of order.
8.1. Adjustable Focus
In dependence of the scheduled operation and environment, the end has to select the right
focus distance prior to place the order.
• Focus Option F0: 190 - 300 mm (7.4 – 12”)
• Focus Option F1: 300 - 600mm (12 – 24”)
• Focus Option F2: 600mm - infinity (24” – ∞)
8.2. Laser Sighting (Sighting Option L)
The laser sighting allows fast and precise aiming at small, rapidly moving targets, or targets
passing at irregular intervals. The laser is specially aligned with the sensor’s lens to provide
accurate, non-parallax pinpointing of targets. The laser comes as a small, bright red spot
indicating the center of the area being measured.
Figure 35: LASER Spot Size Indication
The laser is a Class II, AlGaInP type laser with an output power less than 1 mW, and an output
wavelength of 650 nm. The laser complies with FDA Radiation Performance Standards,
21CFR, subchapter J, and meets IEC 825, Class 2 specifications
Warning
Avoid exposure to LASER light! Eye damage can result.
Use extreme caution when operating!
Never look direct into the LASER beam.
Never point directly at another person!
If LASER Sighting is activated, avoid looking through the Visual Sighting Port
of the Control Panel. Mirror and dispersion effects can injure Eyes.
To Next Page
Loading...
