Fluke Endurance E3ML - Adapter Kit for Endurance in WJ-5 Water Jacket Installations (E-AK-7); Endurance Universal Adapter Accessory (E-UAA); Figure 69: Endurance Universal Adapter Accessory (E-UAA); Figure 70: Adapter Kit for Endurance in WJ-5 Water Jacket Installations (E-AK-7)

Accessories
Mechanical Accessories
79
9.2.9. Endurance universal adapter accessory (E-UAA)
The E-UAA clamps around the Endurance sensor, and can be used to mount it to an existing
Modline 5 installation, where a RAM (Right Angle Mount) is used, a tripod, or any device using
a 1/4–20 UNC threaded mounting hardware. The E-UAA is not identical to the Modline5 UAA.
Once the E-UAA is fixed to the Endurance sensor, it is compatible with all Modline series
models and allows the reuse of inherited mounting accessories.
Figure 69: Endurance universal adapter accessory (E-UAA)
9.2.10. Adapter kit for Endurance in WJ-5 water jacket installations (E-AK-7)
The Adapter kit is for mounting of an Endurance sensor into an existing Ircon WJ-5 water jacket
installation. The adapter kit exist out of the mounting flange (E-MF-7), two Modline5 mounting
nuts, a Modline5 fixed bracket, a Modline5 water jacket mounting bracket, and a flange adapter
to adapt the outer Endurance mounting thread to the outer Modline5 thread dimension.
Figure 70: Adapter kit for Endurance in WJ-5 water jacket installations (E-AK-7)
w ww. . com
information@itm.com1.800.561.8187