Fluke Endurance E3ML - 12-Socket DIN Cable Connector (E-2 CCON) for Multi-Conductor Cable; Figure 57: 12-Socket DIN Cable Connector (E-2 CCON) for Multi-Conductor Cable; Figure 58: Modline5 Patch Cable Kit to Use Existing Modline5 Cables (E-M5 PK); Modline5 Patch Cable Kit to Use Existing Modline5 Cables (E-M5 PK)

Endurance® Series
Users Manual
72
9.1.10. 12-socket DIN Cable connector (E-2CCON) for multi-conductor cable
The 12-socket DIN Cable connector is a spare connector to replace a damaged one. In case
of shortening the existing multi-conductor cable, you can assemble the spare connector by your
own experienced technician. Please see in chapter 5.3.1, M16 12-Pin DIN Connector Signal
Assignment for detailed information.
Figure 57: 12-socket DIN Cable connector (E-2CCON) for multi-conductor cable
9.1.11. Modline5 patch cable kit to use existing Modline5 cables (E-M5PK)
In case of replacing an existing Modline5 device installation by an Endurance series device, the
already existing cabling is reusable, by inserting the Modline5 patch cable kit (E-M5PK). The
patch cabe kit converts into the needed Endurance series M16 connector type from a Modline5
11-pin type to an Endurance M16 12-socket type.
Figure 58: Modline5 patch cable kit to use existing Modline5 cables (E-M5PK)
w ww. . com
information@itm.com1.800.561.8187