104 Faults and warnings
5. Once you have changed the animal number, confirm confirm? by choosing .
Note: Only when you have changed the animal number will your confirmation take effect and
the warning be deleted.
9.2.12 Machine capacity
When there is no more storage space available for animal numbers or transmitter numbers, the
Warning, Machine capacity will appear.
Confirm Machine capacity by choosing , to obtain detailed information.
• system limit 250 animals means: No more free animal numbers are available.
• Transmitter storage full means: No more storage space available for further transmitter
numbers.
You rectify the warning "system limit 250 animals" as follows:
1. Cancel the registration of one or more animals in the Animal control menu (see the oper-
ator's manual).
NOTICE!
When you have canceled an animal's registration it will not receive any feed.
This can lead to malnutrition. Malnutrition can cause impaired growth and development, in-
creased susceptibility to illness or even the death of your calves.
► The end user must use an alternative method to supply their calves with feed.
2. Confirm delete warning? by choosing .
You rectify the warning "transmitter storage full" as follows:
1. Navigate via > Animal management > Transmitters to the Edit sub-menu.
2. Select the transmitter number to be deleted and confirm Delete by choosing .
Note: You can only delete transmitter numbers of calves that are not registered (= status:
available).
3. Confirm delete warning? by choosing .
9.2.13 Check SD card
The Check SD card warning appears in the display:
• If data is to be saved manually, but no SD card is present.
• If data is to be saved manually, but the SD card is currently write-protected.
• If data is to be saved automatically but the SD card is full.
• If data is to be saved automatically but the SD card is currently write-protected.
To Next Page
Loading...