Förster-Technik TAP5-VS2-50 - Introduction; Models

Introduction 7
1. Introduction
This operating manual enables you to operate this automatic feeder machine safely as intend-
ed.
• Have the end user provide you with the operating manual for the automatic feeder, the op-
erating manuals of all additional equipment to be connected and the safety data sheets for
cleaning agents.
• Carefully read all operating manuals and safety data sheets before starting up the automatic
feeder for the first time or restarting it.
• Observe all of the warnings and safety instructions in these operating manuals and safety
data sheets at all times.
1.1 Models
The following automatic feeder versions are available:
• Powder - for the use of milk substitute (MP).
• Combi - for the use of milk substitute and fresh milk.
• Fresh milk - for the use of fresh milk.
All automatic feeder versions can be equipped with a variety of pieces of peripheral equipment
and options.