Appendix 119
10.2 Materials list
The materials used in the automatic feeder include:
• Brass, Enzidor®
• Silicon carbide
• Carbon
• V2A, V4A
• Plastics: PET, TPE, silicone, PVC, NBR, ABS, PUR
•Viton
• Vulcanized fiber, graphite-loaded
• Rubber
• Bronze
and confirm Boiler: fill by choosing .
Input the time and date using > Device data > Date and Time.
Run cleaning programs.
Fill milk powder (MP).
Perform calibration.
Check setup settings.
To Next Page
Loading...