118 Appendix
Change date of individual animals OK?
Group
Feed
Concentration
Concentrate
Additive 1 / additive 2
Weight
Plan day (correction days)
Cleaning OK?
Check or make settings:
Temperature, flushing water.
Flushing agent amount.
Flush the teats:
Drainage mode
Cleaning circuit
Air (pulsating compressed air cleaning)
Perform cleaning.
Recommissioning OK?
Set up the automatic feeder.
Clean outside of automatic feeder with damp cloth.
Fit powder hopper attachment safety grid.
Connect water connection of automatic feeder to milk tank using new hose.
Commission the cleaning agent supply.
Fitting a new teat.
Connect teat to feeding box valve (rationed mode) or to mixer beaker (ad lib mode) us-
ing new hose. (Install hose with downwards gradient to automatic feeder).
Connect mixer drain valve and the drain channel using a hose. The hose may not be
extended.
Replace the dummy plug with the cable gland for the Ethernet cable, and connect the
Ethernet cable.
Remove locks of antenna connections and connect antenna cable.
Connect power plug to installed socket and switch on the automatic feeder.
On the hand terminal, acknowledge the message Fault, HE not filled by pressing .
Press
To Next Page
Loading...