EasyManua.ls Logo

Förster-Technik TAP5-VS2-50 - Structural Alterations

Default Icon
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important safety instructions 21
1 Protective grid
WARNING!
There is a risk of injury due to rotating tools.
The safety grid must always be installed when the unit is operating.
Scraper next to the milk powder outlet
The powder discharge opening may only be cleaned with the scraper. This prevents finger and
hand injuries caused by the mixer starting up automatically.
1 Mount for scraper
2 Scraper
WARNING!
There is a risk of injury due to automatic start-up
Do not reach into the hazard area of the powder discharge opening. The powder dosing can
start up automatically at any time, crushing or cutting off your fingers.
Always switch off the automatic feeder using the main switch and disconnect the mains plug.
Use only the scraper supplied to clean the powder discharge opening.
2.6 Structural alterations
The automatic feeder must not be subjected to any unauthorized alterations at any time.
Only genuine spare parts, wearing parts and accessories may be used, since any warranty
claims will otherwise be void.
1

Table of Contents

Related product manuals