50 Programming and control
4.6.5 Function keys
The hand terminal has two freely programmable function keys and . You define which
functionality or which menu will be called up when the respective function key is pressed.
You define the function keys as follows:
1. Navigate via > Device data to the Function keys sub-menu.
2. Use or to go to the desired function, for example Start mixer.
3. Confirm with
4. Choose or to choose the symbol of the function key to which the assignment is to
be made.
4.1. The list symbol stands for the key .
Note: This key is assigned the animal list by default.
4.2. The hash symbol stands for the key .
4.3. The hyphen [-] in the selection box is used to remove an assignment.
4.6.6 Animal list
In the Animal list menu you can list the calves in a table sorted by parameters. The table is
sorted in ascending order by the first column of the first parameter. This means that the calf with
the greatest need for monitoring is at the very top of the table. The following parameters can be
displayed:
• Feed consumption as a percentage
• Feed consumption in liters (today or yesterday)
• Drinking speed as a percentage
• Animal visits
• Break-offs
Note: You can also access the animal list directly via the key .
Default value: 16 sec.
Permitted range of values: 10 to 60 sec
To Next Page
Loading...