Introduction 9
1.2.2 Rear view of automatic feeder
1 Processor and power circuit board
2 Outlet valve for hose cleaning
1.2.3 Left side view of the automatic feeder
The Name plate is located above the left side door on the outside of the automatic feeder. It
contains information about the manufacturer, type and number of the automatic feeder, informa-
tion about connecting the feeder to the power supply as well as its certification. An example of
a name plate is shown below.
1 Name and address of the manufacturer
2 Type and number of the automatic feeder
3 Information on the connection to the power supply
4 Certification of the automatic feeder
To Next Page
Loading...