64 Setup
5.4.6 Heating system
Here you specify whether the feeder has a heating system and, if so, what type of heating relay
it has.
You set the heating type as follows:
1. In the setup menu, choose the Machine option.
2. In Heating, select electronic.
3. Confirm your entry with .
5.4.7 Boiler valve
Please do not change the factory setting brass.
5.5 Equipment
Here you specify whether the automatic feeder is equipped with certain components or options.
5.5.1 Mixer drain
The contents of the mixer are drained fully automatically via the mixer drain valve. The mixer
drain valve is included as standard.
This is how to activate the mixer drain valve:
1. In the setup menu, open the Equipment menu item.
2. In Mixer, select yes.
3. Confirm your entry with .
5.5.2 Additive dispenser
Up to two additive dispensers can be connected to the automatic feeder.
You activate the additive dispenser as follows:
1. In the setup menu, open the Equipment menu item.
2. In Add. disp. 1 select yes if there is an additive dispenser, otherwise choose no.
3. Confirm your entry with .
4. In Add. disp. 2 select yes if there is a second additive dispenser, otherwise choose no.
5. Confirm your entry with .
5.5.3 Flushing agent 1
Flushing agent is fully automatically dispensed via the flushing agent pump during a cleaning
cycle.
To Next Page
Loading...