Förster-Technik TAP5-VS2-50 - Squelch Values and Identification Ranges; Connecting Antenna Cables

Commissioning 27
3.6.2 Squelch values and identification ranges
The approximate range of the antennas is 15-25 cm.
The version of the antenna is crucial for the identification range. With Nedap micro-identifica-
tion, you can set the range via the squelch value.
The squelch values and the identification ranges for the various identification systems are listed
in the following table. These squelch values are based on experience and are set at the factory.
If the actual values differ, the settings can be changed in the setup (see 5. "Setup" - 59).
3.6.3 Connecting antenna cables
Connect the antenna cable as follows:
1. If necessary, switch the automatic feeder off at the main switch.
2. Connect the antenna cables to the connections provided.
1 Antenna connections
System Squelch (default values) Identification range
Collar
(X-responder)
0 15 - 20 cm
Collar
(PM-responder)
180 15 - 20 cm
Earmark (also in the collar)
(Nedap system)
0 15 - 20 cm
Earmark (also in the collar)
(Tiris system)
inactive 15 - 20 cm
1