52 Programming and control
•
For example: The calf shown with the number 799 is in the weaning phase (reduced
plan tendency), has been assigned to group A and has visited feeding box 2. At present,
the calf has only called up 29% of its feed entitlement, yesterday it was only 56%. The
current value for drinking speed is 100% ( ); yesterday it was more than 100% ( +).
4. Choosing takes you to the detailed view for the animal currently highlighted. By choos-
ing you can scroll to the other animals.
Note: In each line, pressing calls up detailed information.
4.6.7 Backing up and restoring data
Every day at midnight, a backup of the animal data and device data is performed automatically
so that in the event of data loss a current backup of the data is available.
NOTICE!
Data can be lost when the program version of the automatic feeder is updated. You must
also save the data of the automatic feeder manually, for example to an SD card.
Otherwise, calves may suffer from malnutrition if incorrect feed portions are dispensed. Malnu-
trition can cause impaired growth and development, increased susceptibility to illness or even
the death of your calves.
Note: The automatic feeder performs an automatic data backup every hour. If you make chang-
es and then switch the automatic feeder off, changes made within the last hour are lost. To save
the current data, perform an internal data backup.
4.6.7.1 Internal data backup
Backing up data
You back up the data as follows:
1. Navigate via > Device data > Data backup to the Internal (automatic feeder) sub-
menu.
2. Confirm save? by choosing .
A progress bar informs you about the current status of the data backup being carried out.
To Next Page
Loading...