78 Transmitter and animal management
Reading the new transmitter number for the change
You read a new transmitter number as follows:
1. Navigate via > Animal management > Transmitters to the Edit sub-menu.
2. Select the transmitter number to be changed.
3. Confirm read? by choosing .
A new menu is displayed, and the transmitter number flashes in the first line.
4. Hold the transmitter that you want to read next to the identification unit.
The number is automatically accepted in the first line.
5. Confirm accept? by choosing .
7.1.6.2 Changing the animal number
Like the transmitter number, the animal number can also be changed.
1. Navigate via > Animal management > Transmitters to the Edit sub-menu.
2. Select the animal number you would like to change.
3. In the Animal No. menu, change the animal number that is currently allocated to the trans-
mitter and confirm by choosing .
7.1.6.3 Deleting transmitter numbers
You delete transmitter numbers as follows:
1. Navigate via > Animal management > Transmitters to the Edit sub-menu.
2. Select the transmitter number to be deleted and confirm Delete by choosing .
Note: You can only delete transmitter numbers of calves that are not registered (= status:
available).
7.1.7 Deleting the transmitter number when canceling an animal
Generally, the collars (or earmarks) with the respective transmitters remain at the organization
and are reused after the calf is taken out of the pen and its registration is canceled. For this rea-
son, the default setting when canceling the registration of a calf is to not delete its transmitter
number. If the calf's transmitter is, however, not reused but rather stays with the calf, (lifelong
earmark), make the following setting in the feeder:
1. Navigate via > Animal management > Cancellation to the Settings sub-menu.
2. Select the yes option in the Delete no. menu
When a calf's registration is canceled, the transmitter number is also deleted along with the
animal number. This prevents an accumulation of unused transmitter numbers, which would
use up the available storage space.
To Next Page
Loading...