Förster-Technik TAP5-VS2-50 - Overview of the Setup Menus

60 Setup
5.1 Overview of the Setup menus
Language German
Time/date Time / date
Type Powder
Number 1 - 99 (= machine number, decimal)
Address 2-FC (= CAN address, hexadecimal)
System Interval (IV)
Machine Operating mode SA
Base size 500 ml
Heating system electronic
Boiler valve Brass
HE valve Brass
Mixer drain yes
Additive dispenser 1 yes / no
Additive dispenser 2 yes / no
Flushing agent 1 yes
Equipment Flushing agent 2 yes / no
SP 1 sensor no / rod
Powder sensor yes / no
Circulation valve Valve / no
Gully valve 2 yes / no
Air valve yes / no
Mix. sensor T. yes
Water meter yes
Supply electrode yes
Point electrode yes
Identification Type Multi / Tiris / Ned
Squelch 0 - 255
ID chip activated yes
read?
Calibration
scales
activated (yes / no)
adjust?
Cal. factor
Date
<internal 1>, <internal 2>
Feed <IFS feed 1 .. 8>
Stations <IFS feed 4-fold 1, 2>
CalfRail