Connecting to the web-based manager or CLI Hardware installation
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
32 Revision 2
http://docs.fortinet.com/ • Feedback
After using the front panel to configure these basic settings, you must still connect to the
web-based manager to complete additional setup. To continue, see “Connecting to the
web-based manager” on page 28.
Table 4: Control buttons on the front panel
Button Description
Enter Move into the currently selected menu area, or confirm your selected
option.
Esc Exit the current menu area.
Up Select the previous option, or increase the number for an IP address,
default gateway address, or netmask.
Down Select the next option, or decrease the number for an IP address,
default gateway address, or netmask.
To Next Page
Loading...
