Step 7: Reviewing and saving the configuration Quick Start Wizard
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
88 Revision 2
http://docs.fortinet.com/ • Feedback
Step 7: Reviewing and saving the configuration
Review the configuration. If it is correct, select OK.
A dialog will appear, enabling you to download a backup copy of the current configuration
before saving the settings that you configured during the Quick Start Wizard.
When saving the new configuration, the FortiMail unit displays a notice that the Quick Start
Wizard is complete.
Continuing the installation
After using the Quick Start Wizard:
1 If you have multiple FortiMail units, and you want to configure them in high availability
(HA) mode, configure the HA settings before physically connecting the FortiMail units
to your network.
For instructions on configuring HA, see the FortiMail Administration Guide.
2 If you have subscribed to FortiGuard Antivirus or FortiGuard Antispam services,
connect the FortiMail unit to the Fortinet Distribution Network (FDN) to update related
packages. For details, see “Connecting to FortiGuard services” on page 89.
3 You may need to configure additional features that may be specific to your operation
mode and network topology, such as configuring your router or firewall, and records on
your public DNS server. For instructions applicable to your operation mode, see:
• “Gateway mode deployment” on page 95
• “Transparent mode deployment” on page 119
• “Server mode deployment” on page 139
4 Verify that email clients can connect to or through the FortiMail unit. For details, see
“Testing the installation” on page 159.
To Next Page
Loading...
Need help?
General