Installing the cable management arm FortiMail-2000B hardware installation
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
44 Revision 2
http://docs.fortinet.com/ • Feedback
Figure 11: Moving the CMA away from the CMA tray
• At the hinged end, lift the CMA up and off of the tray to unseat it from the tray catch.
Once it is unseated from the tray, swing the CMA away from the system (10).
5 To cable the system using the CMA, do the following:
• Using the tie wraps provided, bundle the cables together as they enter and exit the
baskets so they do not interfere with adjacent systems (11).
Note: You can also extend the CMA into the service position once it is cabled to access the
back of the system.
Caution: To avoid potential damage from protruding cables, secure any slack in the status
indicator cable before routing this cable through the CMA.
To Next Page
Loading...
