Fortinet FortiMail-100 - Removing the System from the Rack

FortiMail-2000B hardware installation Mounting the FortiMail unit
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
Revision 2 39
http://docs.fortinet.com/ • Feedback
Figure 6: Routing the cables
• Bundle the cables gently, pulling them clear of the system connectors to the left and
right sides (19).
• Thread the Velcro straps through the tooled slots on the outer or inner CMA
brackets on each side of the system to secure the cable bundles (20).
Removing the system from the rack
To remove the system from the rack
1 Locate the lock levers on the front ends of both inner rails (1).
18
20
19