FortiMail-5001A hardware installation
FortiMail™ Secure Messaging PlatformVersion 4.0 Patch 1Install Guide
Revision 2 53
http://docs.fortinet.com/ • Feedback
FortiMail-5001A hardware installation
Before use, the FortiMail board must be correctly inserted into an Advanced
Telecommunications Computing Architecture (ACTA) chassis such as the FortiGate-5140,
FortiGate-5050, or FortiGate-5020 chassis.
Before inserting the board into a chassis you should make sure the SW-11 switch is set
correctly.
This section describes:
• Changing FortiMail SW11 switch settings
• FortiMail mounting components
• Inserting a FortiMail board
• Removing a FortiMail board
• Resetting a FortiMail board
• Troubleshooting
To Next Page
Loading...
