Fortinet FortiMail-100 - Connecting the Keyboard, Mouse, and Monitor

FortiMail-2000B hardware installation Connecting the keyboard, mouse, and monitor
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
Revision 2 49
http://docs.fortinet.com/ • Feedback
To remove the front bezel
1 Using the system key, unlock the bezel.
2 Pull up on the release latch next to the key lock.
3 Rotate the left end of the bezel away from the system to release the right end of the
bezel.
4 Pull the bezel away from the system. See Figure 16.
Figure 16: Removing the front bezel
To install the front bezel
1 Insert the hinge tab on the right of the bezel into the slot on the right side of the system
front panel.
2 Rotate the left side of the bezel toward the system.
3 Press the bezel to the system to engage the latch.
Connecting the keyboard, mouse, and monitor
1 release latch 2 bezel
3 hinge tabs 4 key lock
4
1
3
2