FortiMail-2000B hardware installation Installing the cable management arm
FortiMail™ Secure Messaging Platform Version 4.0 Patch 1 Install Guide
Revision 2 43
http://docs.fortinet.com/ • Feedback
Figure 10: Installing and removing the cable management arm
• Fit the other latch on the end of the outermost bracket until the latch engages (7).
• To remove the CMA, disengage both latches by pressing the CMA release buttons
at the top of the inner and outer latch housings (8).
4 To move the CMA away from the CMA tray, do the following:
• The CMA can be pulled away from the system and extended away from the tray for
access and service (9).
To Next Page
Loading...
