Framery 2Q Huddle
5. Lift the door into place and guide both hinges together.
Warning: Lifting requires two people. Make sure that the lower hinge falls into
place.
Note: Keep the door in the open position (170° angle).
Note: Use a separate piece of carpet in the installation. Set the separate piece
of carpet on the ground to protect the door.
6. Check that the air goes out of the seal when you close the door. Cut off 2 mm (1/16 in)
at the lower end of the seal, if needed.
13.3 Adjust the closing speed of the door
If you want the door to close faster, you can adjust it. Test the door before adjustment.
Installation instructions
info@frameryacoustics.com
103