Framery 2Q Huddle
16 Install the whiteboard
1. Measure the locations for the whiteboard brackets on the wall with a spirit level.
Install the brackets in a butt joint with the U-profile seal.
Note: Install the flat part of the bracket level with the edge of the wall felt.
Note: Make sure that the screws are level with the bracket so that they do not
scratch the whiteboards.
2. Install the whiteboard brackets on the wall with 4x40 screws (10 pcs).
Note: Do not overtighten.
178
Installation instructions
info@frameryacoustics.com
To Next Page
Loading...
