Framery 2Q - Install the Back Half of the Roof; Prepare the Roof Modules (Back)

Framery 2Q Huddle
5.2 Install the back half of the roof
5.2.1 Prepare the roof modules (back)
1. Stand the roof modules on their sides.
Note: Make sure that you join the correct roof module pair. The two roof
modules have a hole in one corner of the ceiling felt.
Note: Make sure that the black ABS strips are against the ground.
2. Unscrew the 4x30 screws (8 pcs) and remove the cover plates (8 pcs). Set the cover
plates and screws aside.
22
Installation instructions
info@frameryacoustics.com